Front Window Anti-Pinch

POWER WINDOW SERIAL LINK

POWER WINDOW MAIN SWITCH : Diagnosis Procedure


1. CHECK POWER WINDOW SWITCH OUTPUT SIGNAL

1.Turn ignition switch ON.
2.Check signal between power window main switch harness connector and ground.





Is the inspection result normal?
YES- GO TO 4.
NO- GO TO 2.

2. CHECK POWER WINDOW SERIAL LINK SIGNAL

1.Turn ignition switch OFF.
2.Disconnect power window main switch connector.
3.Turn ignition switch ON.
4.Check voltage between power window main switch harness connector and ground.





Is the inspection result normal?
YES- Replace power window main switch.
NO- GO TO 3.

3. CHECK POWER WINDOW SERIAL LINK CIRCUIT

1.Disconnect BCM connector.
2.Check continuity between BCM harness connector and power window main switch harness connector.





3.Check continuity between BCM harness connector and ground.





Is the inspection result normal?
YES- Replace BCM. Exploded View.
NO- Repair or replace harness.

4. CHECK INTERMITTENT INCIDENT

Intermittent Incident.
- INSPECTION END