Work Procedure

CLUTCH 1 POSITION LEARNING

Work Procedure


CAUTION:
- Before using inspection mode 1 when the Li-ion battery level is low, in order to engage clutch 1 and charge the battery from the engine, use CONSULT "EV/HEV" "DATA MONITOR" mode and check that the "HV BATTERY LEVEL" reading is 50% or more, or else use the "Li-ion battery state of charge" in the information display on the combination meter and check that the battery level is 50% or more.
- Check that the engine coolant temperature is 70 �C (158 �F) or more before using inspection mode 1.

1. PERFORM CLUTCH 1 POSITION LEARNING

1.Set the vehicle to READY .
2.Shift the selector lever position N and check that an engine stops.
3.Fully depress accelerator pedal and start an engine.
4.Fully release accelerator pedal and stop an engine.
5.Repeat step 3 and 4 for 50 times.
- END