Information Display (ASCD)

INFORMATION DISPLAY (ASCD)

Component Function Check


1. CHECK INFORMATION DISPLAY (ASCD)

1.Set the vehicle to READY.
2.Press MAIN switch on ASCD steering switch.
3.Drive the vehicle at more than 40 km/h (25 MPH).

CAUTION:
Always drive the vehicle at a safe speed.
4.Press SET/COAST switch.
5.Check that the reading of the speedometer shows the same value as the set speed indicated in the information display while driving the vehicle on a flat road.
Is the inspection result normal?
YES- INSPECTION END
NO- Proceed to .


Diagnosis Procedure


1. CHECK DTC

1.Perform self- diagnosis.
2.Check that DTC UXXXX or P31FF is not displayed.
Is the inspection result normal?
YES- GO TO 2.
NO-1- Perform trouble diagnosis for DTC UXXXX. Testing and Inspection.
NO-2- Perform trouble diagnosis for DTC P31FF. P31FF.

2. CHECK DTC WITH COMBINATION METER

Combination Meter.
Is the inspection result normal?
YES- GO TO 3.
NO- Perform trouble diagnosis relevant to DTC indicated.

3. CHECK INTERMITTENT INCIDENT

Intermittent Incident.
Is the inspection result normal?
YES- Replace combination meter. Removal and Installation.
NO- Repair or replace error-detected parts.