Removal and Installation

APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) CONTROL UNIT

Removal and Installation


REMOVAL

1.Remove the Instrument lower panel RH. Removal and Installation.





2.Disconnect the tube (2) from the aroma unit (1) (models with
Forest Air system).
3.Pull the tube (2) out from clamp (A) to remove it (models with
Forest Air system).
4.Turn the clamp (A) to remove it (models with Forest Air system).





5.Remove the installation nut (A), and then remove the VSP control unit (1) and warning buzzer (2) as a set.
6.Disconnect the VSP control unit connector and warning buzzer connector.

INSTALLATION

Install in the reverse order of removal.