Removal and Installation

IPDM E/R

Removal and Installation


CAUTION:
To prevent damage to the parts, IPDM E/R integrated relays cannot be removed.

REMOVAL

1.Disconnect 12V battery cable from negative terminal.
2.Remove cowl top cover (RH). Removal and Installation.





3.Remove IPDM E/R cover A (1) and IPDM E/R from IPDM E/R
cover B while pressing pawls of the IPDM E/R cover B.










4.Disengage pawls on upper side of IPDM E/R cover A (2), and then remove IPDM E/R (1) in the direction indicated by an arrow as shown in the figure.





5.Disconnect harness connector and remove IPDM E/R.





6.Remove IPDM E/R cover B mounting bolts (A), and then remove
IPDM E/R cover B (1) from traction motor inverter.

INSTALLATION

Install in the reverse order of removal.