Work Procedure (Inspection Mode 5)

INSPECTION MODE

Work Procedure (Inspection Mode 5)


INSPECTION MODE 5


1. CHANGING TO INSPECTION MODE

With CONSULT
1.Turn ignition switch OFF.
2.Select "INSPECTION MODE 5" in "ACTIVE TEST" mode of "EV/HEV".
3.Touch "ON".
4.Change to inspection mode 5.
5.Set the vehicle to READY.
Without CONSULT
1.Perform the following steps within 60 seconds.
-Turn ignition switch ON with the selector lever at the P position.
-Fully depress the accelerator pedal, then fully release it 6 times.
-While depressing the brake pedal, shift the select lever to the N position.
-Fully depress the accelerator pedal, then fully release it 6 times.
-While depressing the brake pedal, shift the select lever to the P position.
-Fully depress the accelerator pedal, then fully release it 6 times.
2.Change to inspection mode 5.
3.Set the vehicle to READY.
- END

CANCELING INSPECTION MODE 5

Inspection mode 5 is canceled when the ignition switch turns OFF.