Part 1: Using C-III Plus - Record the Multi AV Control Unit Part Number

Part 1: Using C-III plus - record (write down) the Multi AV control unit part number.

1. Make sure the shift selector is in Park, and the parking brake is set.

2. Connect the C-III plus VI to the vehicle.

3. Turn the ignition ON.

NOTE:
You may want to start the engine to keep the battery charged during parts 1 through 4 of this procedure.





4. Write down customers radio station presets. (Presets will be lost during this procedure.)

5. Open/start ASIST on the CONSULT PC, then select CONSULT-III plus.





6. Wait for VI to be detected, and status box(s) to turn "green" (Figure 1).

7. Select detected VI.

^ If there is more than one VI in the shop, select the VI that is being used on the current vehicle by highlighting the Connection Status box that has the correct serial number.

8. Select Diagnosis (One System)





9. Select MULTI AV





10. Select ECU Identification

* IMPORTANT *

11. Print or write down the ECU PART NUMBER for Warranty Information. 25915 - __________

NOTE:
In Part 3 of this procedure the ECU Part Number will be used to confirm the Multi AV reconfiguration was successful.

12. Select the Home button when done.