Hazard Function

HAZARD FUNCTION

Description

Performs answer-back for each operation with number of blinks.


Component Function Check


1. CHECK FUNCTION

1.Use CONSULT to perform Active Test ("FLASHER").
2.Touch "LH" or "RH" to check that it works normally.
Is the inspection result normal?
YES- Hazard warning lamp circuit is OK.
NO- Refer to "Diagnosis Procedure" .


Diagnosis Procedure


1. CHECK HAZARD SWITCH CIRCUIT

Refer to "Wiring Diagram TURN AND HAZARD WARNING LAMPS -" Electrical Diagrams.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace harness.

2. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
- INSPECTION END