Special Repair Requirement

INSPECTION AND ADJUSTMENT

SYSTEM SETTING : Special Repair Requirement


1. CHECK TYPE OF TRANSMISSION

Check type of transmission for the vehicle.
Witch type of transmission is used for the vehicle?
MT- GO TO 2.
AT- GO TO 4.

2. STEP 1 (FOR M/T MODELS)

Turn ignition switch OFF.
- GO TO 3.

3. STEP 2 (FOR M/T MODELS)

Push setting button and hold for more than 10 seconds, then confirm blinking of the memory switch indicator.
- Seat synchronization function is ON: Memory switch indicator blink two times.
- Seat synchronization is OFF: Memory switch indicator blink once.
- END

4. CHOOSE METHOD

There are three way of setting method.
Which method do you choose?
With set switch-GO TO 5.
With CONSULT-GO TO 7.

5. WITH SET SWITCH - STEP 1 (FOR A/T MODELS)

1.Turn ignition switch OFF.
2.Push setting button and hold for more than 10 seconds, then confirm blinking of the memory switch indicator.
- Entry/exit assist (seat/steering column) and seat are ON: Memory switch indicator blink two times.
- Entry/exit assist (seat/steering column) and seat are OFF: Memory switch indicator blink once.
- GO TO 6.

6. WITH SET SWITCH - STEP 2 (FOR A/T MODELS)

1.Turn ignition switch ACC.
2.Push setting button and hold for more than 10 seconds, then confirm blinking of the memory switch indicator.
- Seat synchronization are ON: Memory switch indicator blink two times.
- Seat synchronization are OFF: Memory switch indicator blink once.
- END

7. WITH CONSULT - STEP 1 (FOR A/T MODELS)

Select "Work support".
- GO TO 8.

8. WITH CONSULT - STEP 2 (FOR A/T MODELS)

1.Select "EXIT SEAT SLIDE SETTING", "EXIT TILT SETTING" or "SEAT SLIDE VOLUME SET" then touch display to change between ON and OFF.
-EXIT SEAT SLIDE SETTING: Entry/exit assist (seat)
-EXIT TILT SETTING: Entry/exit assist (steering column)
2.Then touch "OK".
- END