Removal and Installation

UNIFIED METER AND A/C AMP.

Removal and Installation


REMOVAL

1.Remove the display unit. Refer to "Removal and Installation" Without Rear View Camera (BASE AUDIO WITHOUT REAR
VIEW CAMERA) or "Removal and Installation" With Rear View Camera (BASE AUDIO WITH REAR VIEW CAMERA) or
"Removal and Installation" Without Navigation (BOSE AUDIO WITHOUT NAVIGATION) or {LINK_TO_MANY:0000000008296408}{LINK_TO_MANY:0000000008296409}, "Removal and
Installation" (BOSE AUDIO WITH NAVIGATION).
2.Remove the unified meter and A/C amp and AV control unit as an assembly.
3.Remove the bracket screws and remove the unified meter and A/C amp.

INSTALLATION

Install in the reverse order of removal.
NOTE:
- Unified meter and A/C amp. screws are different from other screws. Never confuse them when installing.
- Since AV control unit connector and unified meter and A/C amp. connector have the same from, be careful not insert them wrongly.