Removal and Installation

FRONT FOG LAMP

Removal and Installation


CAUTION:
Disconnect the battery negative terminal or remove the fuse.

REMOVAL

1.Remove the engine lower cover. Refer to "Removal and Installation" Removal and Installation.
2.Remove the bumper grille (Sports bumper). Refer to "Exploded View" Exploded View.
3.Remove the bumper finisher. Refer to "Exploded View" Exploded View.
4.Disconnect the fog lamp harness connector.
5.Remove the mounting bolt.
6.Disengage the pawl. And then remove the front fog lamp.

INSTALLATION

Installation is the reverse order of removal.
NOTE:
After installation, perform aiming adjustment. Refer to "Description" Description