Overhaul

FRONT COMBINATION LAMP

Disassembly and Assembly


DISASSEMBLY

1.Rotate the resin cap counterclockwise and unlock it.
2.Rotate the xenon bulb socket counterclockwise and unlock it.
3.Remove the retaining spring lock. Remove the xenon bulb.
4.Remove the HID control unit installation screw.
5.Disconnect the HID control unit harness, and then remove the HID control unit.
6.Rotate the parking/front side marker lamp bulb socket counterclockwise and unlock it.
7.Remove the bulb from the parking/front side marker lamp bulb socket.
8.Rotate the front turn signal lamp bulb socket counterclockwise and unlock it.
9.Remove the bulb from the front turn signal lamp bulb socket.
10.Remove the bulb socket from the headlamp housing assembly.

ASSEMBLY

Assemble in the reverse order of disassembly.

CAUTION:
- Install HID control unit securely.
- After installing the bulb, install the resin cap and the bulb socket securely for watertightness.