Removal and Installation

SEAT MEMORY SWITCH

Removal and Installation


REMOVAL


CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.Disconnect battery negative terminal.





2.Remove the front door finisher (1). Refer to "Removal and Installation" Removal and Installation.
3.Press pawls and remove seat memory switch (2) from front door finisher (1).






INSTALLATION

Install in the reverse order of removal.

CAUTION:
Be sure to clump the harness to the right place.
NOTE:
After installing the driver seat, perform additional service when removing battery negative terminal. Refer to
"ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement" Special Repair Requirement.