Instrument Pack Lens/Cowl, Renew
INSTRUMENT PACK LENS/COWLRENEW
Disconnect the battery.
Remove driver's side dash liner securing screws, release the securing clip, and remove the liner.
Release the steering column clamp, fully extend the steering wheel, and re-tighten the clamp.
Remove the instrument pack assembly securing screws.
Disconnect block connectors from rear of pack.
Fig 1:
Displace and remove the instrument pack assembly.
Release the cowl/lens securing clips and remove the cowl/lens assembly (1).
CAUTION: With the cowl/lens removed, DO NOT rest the pack face down. The gauge needles are extremely delicate and are easily damaged.
Also, take care not to scratch or damage the gauge faces, ensure cleanliness when handling the pack.
Fit the new cowl/lens assembly to the instrument pack.
Fit the instrument pack assembly into dashboard position, re-connect the block connectors.
Align the assembly, fit and tighten the securing screws.
Return the steering wheel to its original position. Refit the dash liner.
Reconnect the battery.
NOTE: On re-connection of the battery, it is important that the ignition is cycled and the bulb check is completed. The odometer reading will then be restored to the correct value.