OBD II Monitoring Conditions

NIPPONDENSO V12 ENGINE MANAGEMENT

OBD II Monitoring Conditions:
When testing for DTC reoccurrence, it can be determined if the Service Drive Cycle was of sufficient length by performing a PDU "Systems Readiness Test".

The Systems Readiness Test occurs automatically when the PDU reads the DTCs from the ECM memory and reports if a full OBD check has or has not been completed since the memory was last cleared.

If DTC P1000 is stored in memory, the on-board diagnostic tests have not been completed.

If DTC P1111 is stored in memory, all on-board diagnostic tests have been completed.

NOTE: For additional "P" Codes not listed in this summary, refer to the Transmission Control DTC Summary.

PDU Datalogger Acronyms:

P0105 - P0116:

P0117 - P0125:

P0131 - P0134:

P0135 - P0155:

P0157 - P0172:

P0174 - P0208:

P0209 - P0303:

P0304 - P0335:

P0336 - P0420:

P0430 - P0500:

P0506 - P1106:

P1107 - P1244:

P1245 - P1367:

P1368 - P1641:

P1646 - P1776: