Service Equipment

Service Equipment
Fault finding at non-franchised service centres assumes the use of general electrical instruments (eg multimeter) of good quality. The digital multimeter specified for use by Jaguar must be of 3.5 digit accuracy with an input resistance of 10 megohm. In the utilization of such equipment, care must be taken not to introduce further faults from damage to cable connectors etc, by clumsy probing. Probing to the rear of connectors through the seal is specifically prohibited.

Fig. 1 Adaptor Coupling For Use With Digital Multimeter:

The digital multimeter probe with a "banana" coupler is shown in Fig. 1 being coupled with an appropriate adaptor for attachment to a connector or module pin.