Engine Speed Sensor: Service and Repair

ENGINE SPEED SENSOR

Fig. 2:

Fig. 3:

Remove
- Open the hood and fit a wing cover.
- Open the trunk and remove the battery cover. Disconnect the battery earth lead.
- Disconnect the engine speed sensor multi-plug (1 Fig. 2).
- Undo and remove the sensor mounting bracket securing bolts (2 Fig. 3).
- Displace the sensor mounting bracket from its locating roll pin (3 Fig. 2).
- Remove the sensor and mounting bracket assembly from the cylinder block.
- Push the split grommet out of the mounting bracket and remove it from the sensor lead (4 Fig. 2).
- Push the sensor lead and multi-plug through the mounting bracket aperture.
- Undo and remove the sensor to mounting bracket securing bolts and separate the sensor and bracket.

Refit

- Fitting a new engine speed sensor is the reverse of the removal procedure.