Rapid Continuous Mil Lamp Flashing

Rapid Continuous MIL Lamp Flashing

Normal Operation
The front impact sensors each have three connections to the DM: supply, supply monitor and ground monitor. If the DM detects that both sensor supplies are disconnected and that both sensors are not grounded correctly the MIL Lamp will flash, continually, indicating both sensor circuits are open.

Possible Causes
- Both front impact sensors disconnected or main wiring harness disconnected.
- System in manufacturing mode.

Electrical Schematic-Rapid Continuous MIL Lamp Flashing, Fig.1:

1. Instrument Panel Fuse
2. Engine Compartment Fuse
3. Safing Sensor
4. Cable Reel Cassettes
MIL Lamp
5. Driver-side Airbag
6. Passenger-side Airbag
7. RH Impact Sensor
8. LH Impact Sensor
9. Airbag
10. Diagnostic Module