A10: Check Harness Continuity ECM to Control Module

NOTE: The recorded DTC will indicate which cylinder(s)







With connectors EM027 EM029 and EM013 disconnected, measure the resistance, as required, between:

EM027/002 and EM013/026
EM027/003 and EM013/033
EM027/006 and EM013/032
EM027/005 and EM013/023
EM029/002 and EM013/034
EM029/005 and EM013/025
EM029/003 and EM013/024
EM029/006 and EM013/031

- Is the resistance <0.5 ohms?
Yes
GO to A11 A11: Check Ground Continuity Control Module
No
Inspect connectors EM027 and EM013 for bent/pushed back pins or locate and repair the harness. Test the system for normal operation