Fuel Tank Pressure Sensor: Service and Repair

Removal
1. Disconnect battery ground cable. Refer to 'Battery, Battery Cable.' Negative

2. WARNING:
BEFORE PROCEEDING, IT IS ESSENTIAL THAT ALL 'SERVICE PRECAUTIONS' ARE READ AND UNDERSTOOD.


Drain the fuel tank using a suitable suction pump/tanker. If the On-board Refueling Vapor Recovery (ORVR) system is fitted, Refer to 'Fuel Delivery and Air Induction, Fuel Tank,Fuel Tank Drain Procedure For ORVR System.' Service and Repair

3. Remove the fuel tank; Refer to 'Fuel Delivery and Air Induction, Fuel Tank.' Service and Repair

4. Remove pressure sensor from evaporative loss flange.

Installation
1. Installation is the reverse of the removal procedure.