P0746

G1: CHECK THE CONTINUITY OF THE PCA SOLENOID CIRCUIT
1. Raise and support the vehicle.
2. Disconnect the transmission vehicle harness connector, GB5.
3. Disconnect the PCM electrical connector GB1.
4. Measure the resistance of the circuit between the transmission vehicle harness connector GB5 pin 1, (NG) and the PCM electrical connector GB1 pin 7, (NG).
^ Is the resistance less than 0.5 Ohms?
-> Yes
Goto [H1]
-> No
REPAIR the circuit between the transmission vehicle harness connector GB5 pin 1, (NG) and the PCM electrical connector GB1 pin 7, (NG). CLEAR DTC. TEST the system for normal operation.