P0775

M1: CHECK THE CONTINUITY OF PCB SOLENOID CIRCUIT
1. Raise and support the vehicle.
2. Disconnect the transmission vehicle harness connector GB5.
3. Disconnect the PCM electrical connector GB1.
4. Measure the resistance of the PCB solenoid circuit between the transmission vehicle harness connector GB5 pin 4, (NY) and the PCM electrical connector GB1 pin 13, (NY).
^ Is the resistance less than 0.5 Ohms?
-> Yes
Goto [N1]
-> No
REPAIR the PCB solenoid circuit between the transmission vehicle harness connector GB5 pin 4, (NY) and the PCM electrical connector GB1 pin 13, (NY). CLEAR DTC. TEST the system for normal operation.