P0796

P1: CHECK THE CONTINUITY OF PCC SOLENOID CIRCUIT
1. Raise and support the vehicle.
2. Disconnect the transmission vehicle harness connector GB5.
3. Disconnect the PCM electrical connector GB1.
4. Measure the resistance of the PCC solenoid circuit between the transmission vehicle harness connector GB5 pin 11, (NW) and the PCM electrical connector GB1 pin 12, (NW).
^ Is the resistance less than 0.5 Ohms?
-> Yes
Goto [Q1]
-> No
REPAIR the PCC solenoid circuit between the transmission vehicle harness connector GB5 pin 11, (NW) and the PCM electrical connector GB1 pin 12, (NW). CLEAR DTC. TEST the system for normal operation.