P1704

P1704-Digital TR circuits reading in-between gear positions during KOEO/KOER.

T1: CHECK DIGITAL TR SENSOR/SHIFT CABLE FOR CORRECT ADJUSTMENT
1. LOCATE the J gate selector into the 'P' position.
2. Disconnect the TR sensor electrical connector GB6.
3. Measure the TR sensor resistance between GB6 pin 10, (SO) and GB6 pin 12, (S).
^ Is the resistance less than 0.5 Ohms?
-> Yes
ADJUST shift cable to correct adjustment. CLEAR DTC. TEST the system for normal operation.
-> No
INSTALL a new TR sensor. CLEAR DTC. TEST the system for normal operation.