P1705

U1: CHECK DIGITAL TR WITH J GATE SELECTOR IN THE PARK POSITION
1. LOCATE the J gate selector into the 'P' position.
2. Disconnect the TR sensor electrical connector GB6.
3. Measure the TR sensor resistance between GB6 pin 10 (SO) and GB6 pin 12, (S).
^ Is the resistance less than 0.6 Ohms?
-> Yes
ADJUST shift cable to correct adjustment. CLEAR DTC. TEST the system for normal operation.
-> No
Goto [U2]

U2: CHECK DIGITAL TR WITH J GATE SELECTOR IN THE NEUTRAL POSITION
2. LOCATE the J gate selector into the 'N' position.
3. Measure the TR sensor resistance between GB6 pin 10, (SO) and GB6 pin 12, (S).
^ Is the resistance less than 0.5 Ohms?
-> Yes
ADJUST shift cable to correct adjustment. CLEAR DTC. TEST the system for normal operation.
-> No
INSTALL a new TR sensor. CLEAR DTC. TEST the system for normal operation.