Harness Component Numbers

Grounds:

On Figures where LHD and RHD circuits are combined and the ground designation differs from LHD to RHD, the RHD ground code is shown in parentheses. If the ground designation is the same for LHD and RHD, only one ground code is used, with no parentheses.

Relays:

All relays are located in the power distribution boxes and the primary junction box. Relays do not have a separate relay connector (base). Standard relays (full size) use the DIN pin numbering system; micro relays use the ISO pin numbering system. The normally closed circuit (pin 87A or pin 4) is not used in jaguar S-TYPE vehicles. The relay location number (#1, for example) and the pin numbers are shown inside each relay.