Steering - Revised Steering Gear Removal/Installation

NUMBER: JTB00092
(Issue 1)

MODEL: S-TYPE, X-TYPE, XJ

DATE: 14 MMM 2008

SECTION: 211

Revised Workshop Procedure - Remove/Install Steering Gear





AFFECTED VEHICLE RANGE

CONDITION SUMMARY:

Situation:

A new workshop procedure has been developed for the removal and installation of the steering gear. It is no longer necessary to remove the road wheels or track rod ends.

Action:

In the event you should have to remove / install the steering gear, follow the Repair

Procedure outlined below.

PARTS:

No parts required

TOOLS:

No special tools required





WARRANTY:

NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to DDW to obtain the latest repair time.

DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.

REPAIR PROCEDURE:

REMOVAL AND INSTALLATION: STEERING GEAR

NOTE:
GLOBAL TECHNICAL REFERENCE (GTR) LOOKUP SEQUENCE IS AS FOLLOWS:

GTR HOME> NAS > MODEL> CHASSIS > WORKSHOP MANUAL> 211: STEERING SYSTEM> 211-02: POWER STEERING

1. Refer to Workshop Manual (GTR) section 211-02: Power Steering, for the revised removal/installation instructions.





Disclaimer