Front Seat Control Module - Headrest

Front Seat Control Module - Headrest 76.70.66

Removal
1. Remove the driver seat.







2. Reposition the seat squab hinge cover.







3. Release the seat squab cover rear lower retaining strip.







4. Remove the seat squab support panel.







5. Reposition the seat squab cover.
- Detach the seat squab cover internal retaining clips.
- Roll the seat squab cover upwards.







6. Detach the seat headrest control module.







7. Remove the seat headrest control module.
- Disconnect the electrical connector.

Installation







1. To install, reverse the removal procedure.
- Tighten to 7 Nm.