Downstream Oxygen Sensor LH

Removal

1. WARNING:
ENSURE THAT THE EXHAUST CATALYST ARE COLD BEFORE COMMENCING WORK

Disconnect the battery ground lead.





2. NOTE: LH shown, RH access equal

From inside the engine compartment, release the relevant sensor(s) multiplug from its mounting bracket and disconnect the plug.





3. NOTE: LH shown, RH access equal

From underneath the vehicle, remove the sensor.

Installation
1. Fitting is the reverse of the removal procedure, noting that a new sealing washer should be used.





2. Tighten the sensor to specification.
3. Make good the exhaust seals.