Indicators

WARNING: PRIOR TO REMOVAL OF ANY SRS INDICATORS AND BEFORE DISCONNECTING ANY SRS INDICATOR ELECTRICAL CONNECTORS, THE BATTERY GROUND CABLE SHOULD BE DISCONNECTED AND A PERIOD OF AT LEAST ONE MINUTE ALLOWED TO ELAPSE.


NOTE: The SRS indicators do not contain any serviceable components.


The SRS consists of the following indicators:

SRS Indicator
The SRS indicator is located in the instrument pack and is driven by the RCM. Malfunction of SRS components or associated circuits will cause the SRS indicator to illuminate. If the warning lamp fails, a fault code is recorded and a warning tone is sounded.

PAD Indicator
The passenger air bag deployment door has a built in lens that displays the passenger air bag module deactivated symbol. The symbol is backlit by the PAD indicator, which is attached to the deployment door mounting bracket. The illumination of the symbol informs the front seat occupants whether or not the passenger air bag module has been deactivated by the occupancy sensing system.

Air Bag Sliding Contact


WARNING: PRIOR TO REMOVAL OF THE AIR BAG SLIDING CONTACT AND BEFORE DISCONNECTING ANY AIR BAG SLIDING CONTACT ELECTRICAL CONNECTORS, THE BATTERY GROUND CABLE SHOULD BE DISCONNECTED AND A PERIOD OF AT LEAST ONE MINUTE ALLOWED TO ELAPSE.


NOTE: The air bag sliding contact does not contain any serviceable components.


The air bag sliding contact is located on the steering column, behind the steering wheel and it transfers electrical signals from the SRS system to the driver air bag module.