Lighting and Horns: Description and Operation

The headlamp "On/Off" switch is located on the driver side of the instrument panel. The switch also operates the sidelights, fog lights and the "Off" delay variable timer switch.

Each headlamp assembly consists of two headlamp units, the main beam lamp unit is the inner and the dipped beam, front parking (side) lamp and the turn signal lamp unit is the outer. Access for bulb replacement is from the engine compartment.

The fog lamps are located in recesses in the front bumper. The two retaining screws are located behind the anti-theft cover and splitter vane.

The license plate lamps can be accessed after the luggage compartment lid liner and upper trim finisher have been removed. Each bulb is accessible after removing the relevant lens.

Each rear lamp assembly incorporates a stop/tail lamp, an auxiliary tail lamp, a fog lamp, a reversing lamp and a direction indicator lamp. Access for bulb replacement is from the luggage compartment. The high mounted stoplamp is powered via the stoplamp switch, it is clipped to the rear screen and is replaceable as a unit.

The side repeater lamps are located within the front fender.

The side marker lamps are located within the rear bumper/front bumper and are supplied as part of a high level bumper assembly, (the side markers are located in the bumper by tangs on one side of the unit and held in position by a spring clip on the other side).