Cellular Phone: Description and Operation

The portable cellular phone system consists of:
- Cellular phone handset (GSM).
- Cellular portable (US Only).
- Handset battery (US Only).
- Coil cord (GSM).
- Roof console mounted microphone.
- Steering wheel switch controls.
- Portable support electronics (PSE) module (US Only).
- Transceiver (GSM).
- In-bumper cellular phone antenna.
- Antenna cable.
- Audio unit controls.

The cellular phone handset is located within the center console armrest. The audio control unit and the steering wheel controls are utilized to operate the system.

The X-Type utilizes two unique cellular phones systems:
- GSM
- US CDMA/TDMA systems

The voice activation control module provides the handsfree operation for cellular phone.

To activate the handsfree function:
1. Switch the ignition to the RUN position. After 4-6 seconds the system will be initialized and "VOICE READY" will be displayed in the message center.
2. Operate the VOICE/PHONE switch on the steering wheel.
3. Clearly state the command when "LISTENING" is displayed in the message center.
4. Operate the VOICE/PHONE switch on the steering wheel or remain silent for 1 second. If speech is detected "PROCESSING" will be displayed in the message center. Operating the VOICE/PHONE switch again will cancel the voice session.

Refer to the Cellular Phone user guide for complete operating instructions.

For additional information on the voice activation control module, Voice Activation Module