Voice Activation System: Description and Operation

Generic Electronic Module (GEM)
The GEM module is located on the right hand side, below the instrument panel. The GEM module controls the wiper and security systems.

Voice Activated Control Module (VACM)
The VACM is located in the left hand side luggage compartment behind the trim panel. The VACM module controls and processes all the voice commands given by the driver, then delivers this information to the audio unit, GSM or AMPS cellular phones and the climate control modules which then carry out these commands.

Microphone
The microphone is used for the cellular phone and to receive voice commands for the audio unit and climate control functions. The microphone supplies the information to the VACM which processes the commands and supplies the necessary information to the correct modules.

Visual Feedback Message Center Display
This display keeps the driver informed of the function which is being selected or processed.

Audible Feedback Instrument Cluster
This audible tone informs the driver when the system is able to receive commands for processing.

Verbal Feedback Speakers
The verbal feedback speakers are incorporated in the audio speakers. These speakers are utilized to confirm to the driver that his verbal command has been accepted and is being proceeded.

Steering Wheel Controls VOICE/PHONE Buttons
These buttons are automatically configured by the audio unit depending on which systems are installed on the vehicle. For additional information, refer to the Owner Guide.