Headlamp Washer Spray Nozzle: Service and Repair

HEADLAMP POWERWASH JET ASSEMBLY

Removal
1. Raise front of vehicle and support on stands.
2. Remove RH front wheel.
3. Remove RH front wheelarch liner.







4. Remove and discard plastic clip from washer fluid hose and disconnect hose from rear of jet assembly.







5. Slacken and remove screw securing cover to jet assembly and remove cover.







6. Remove jet assembly from bumper.
1. Slacken and remove screws securing jet assembly to bumper.
2. Slide jet assembly forward and remove from bumper.

Installation
1. Position jet assembly in bumper and fit and tighten securing screws.
2. Fit cover over jet assembly and fit and tighten securing screw.+
3. Connect hose onto rear of jet assembly and secure with new plastic clip.
4. Fit wheelarch liner.
5. Fit road wheel.+
6. Remove stands and lower vehicle onto wheels.