Sunroof / Moonroof: Adjustments

Roof Opening Panel Alignment

1. Place a suitable 1.0 - 1.2 mm thick plastic spacer between the roof opening panel and the roof panel.
2. Adjust the rear edge of the roof opening panel.
1. Loosen the rear screws on both sides.
2. Push the rear edge up/down to give correct alignment (flush to + 1 mm).







3. Adjust the front edge of the roof opening panel.
1. Loosen the front screws on both sides.
2. Push the front edge up/down to give correct alignment (flush to - 1 mm).







4. Tighten to 3 Nm.







5. Remove the spacer.