Mechanical Specifications

Front Brakes
Brake Pad Nominal Thickness 10.4 mm (0.40 inch)
Brake Pad Minimum Thickness 2 mm (0.08 inch)
Brake Disc Diameter 300 mm (12 inch)
New Disc Nominal Thickness 24 mm (0.95 inch)
Worn Disc Discard Thickness 22.2 mm (0.87 inch)
Maximum Disc Runout (Installed) 0.076 mm (0.003 inch)
Maximum Hub Face Runout (Installed) 0.05 mm (0.002 inch)
Maximum Thickness Variation New Disc 0.076 mm (0.0003 inch) in 360 degrees
Caliper Piston Diameter Single Piston 57 mm (2.24 inch)
Brake Pipe Union 15 Nm (11 ft. lbs.)
Brake Caliper Anchor Plate Retaining Bolts 133 Nm (98 ft. lbs.)
Brake Caliper Retaining Bolt 30 Nm (22 ft. lbs.)
Brake Hose Retaining Bracket 40 Nm (30 ft. lbs.)
Brake Hose to Brake Caliper 10 Nm (7 ft. lbs.)

Rear Brakes
Brake Pad Nominal Thickness 11.80 mm (0.43 inch)
Brake Pad Minimum Thickness 2 mm (0.08 inch)
Brake Disc Diameter 280 mm (11.032 inch)
New Disc Nominal Thickness 12 mm (0.47 inch)
Worn Disc Discard Thickness 10.2 mm (0.40 inch)
Maximum Disc Runout (Installed) 0.076 mm (0.003 inch)
Maximum Hub Face Runout (Installed) 0.05 mm (0.002 inch)
Maximum Thickness Variation New Disc 0.005 mm (0.0002 inch) in 360 degrees
Caliper Piston Diameter Rear 38 mm (1.49 inch)
Brake Hose Union 38 Nm (28 ft. lbs.)
Brake Caliper Anchor Plate Retaining Bolt 70 Nm (52 ft. lbs.)
Brake Caliper Retaining Bolt 32 Nm (24 ft. lbs.)