Flywheel: Service and Repair

Removal
1. Remove the clutch disc and pressure plate. For additional information, refer to Clutch, M/T.





2. NOTE: Prevent the flywheel from rotating.

Remove the flywheel.

Installation





1. NOTE: Make sure the crankshaft and flywheel mating faces are clean before installation.

NOTE: The flywheel will only locate in one position.

NOTE: Tighten the retaining bolts working diagonally.

Install the flywheel.
- Prevent the flywheel from rotating.
- Tighten to 80 Nm.
2. Install the clutch disc and pressure plate. For additional information, refer to Clutch, M/T.