P0568

: P0568. CHECK SPEED CONTROL INPUT WIRE FOR OPEN CIRCUIT/HIGH
RESISTANCE

G92531t1 : CHECK INTERNAL STEERING WHEEL CIRCUIT FOR OPEN CIRCUIT/HIGH RESISTANCE (INPUT)
1. Disconnect steering wheel internal connector, SW5.
2. Disconnect steering wheel connector, SW4.
3. Measure the resistance between SW5, pin 4 (YR) and SW4, pin 1 (YR).

- Is the resistance less than 5 ohms?

-> Yes

-> No
INSTALL a new steering wheel assembly. CLEAR the DTC. TEST the system for normal operation.

G92531t33 : CHECK INTERNAL STEERING WHEEL CIRCUIT FOR OPEN CIRCUIT/HIGH RESISTANCE (SIGNAL)
1. Measure the resistance between SW5, pin 2 (B) and SW4, pin 3.

- Is the resistance less than 5 ohms?

-> Yes

-> No
INSTALL a new steering wheel assembly. �211-04� CLEAR the DTC. TEST the system for normal operation.

G92531t2 : CHECK STEERING WHEEL CASSETTE FOR OPEN CIRCUIT/HIGH RESISTANCE (INPUT)
1. Disconnect steering wheel Cassette connector, IP34.
2. Reconnect steering wheel internal connector, SW5.
3. Measure the resistance between SW5, pin 4 (YR) and IP34, pin 8 (YR).

- Is the resistance less than 5 ohms?

-> Yes

-> No
INSTALL a new steering wheel Cassette assembly. CLEAR the DTC. TEST the system for normal operation.

G92531t32 : CHECK STEERING WHEEL CASSETTE FOR OPEN CIRCUIT/HIGH RESISTANCE (SIGNAL)
1. Disconnect steering wheel cassette connector, IP34.
2. Measure the resistance between SW5, pin 2 (B) and IP34, pin 6 (YG).

- Is the resistance less than 5 ohms?

-> Yes

-> No
INSTALL a new steering wheel cassette assembly. CLEAR the DTC. TEST the system for normal operation.

G92531t30 : CHECK INPUT LEAD FROM ECM TO STEERING WHEEL CASSETTE FOR OPEN CIRCUIT/HIGH RESISTANCE
1. Disconnect ECM electrical connector, EN16.
2. Measure the resistance between IP34, pin 8 (YR) and EN16, pin 47 (YR).

- Is the resistance less than 5 ohms?

-> Yes

-> No
Repair the circuit between EN16, pin 47 and IP34, pin 8. CLEAR the DTC. TEST the system for normal operation.

G92531t31 : CHECK SIGNAL LEAD FROM ECM TO STEERING WHEEL CASSETTE FOR OPEN CIRCUIT/HIGH RESISTANCE
1. Measure the resistance between IP34, pin 6 (YG) and EN16, pin 48 (YG).

- Is the resistance less than 5 ohms?

-> Yes

-> No
Repair the circuit between EN16, pin 48 and IP34, pin 6. CLEAR the DTC. TEST the system for normal operation.