Headlamp: Testing and Inspection

Headlamps

Inspection And Verification
1. Verify the customer concern.
2. Visually inspect for obvious signs of mechanical or electrical damage.

Visual Inspection Chart

Mechanical Electrical
Switch Wiring harness for damage or corrosion
Headlamp levelling motor Electrical connector(s)
Relay(s) Bulb(s)
Fuse(s)
Control module

1. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
2. If the cause is not visually evident, verify the symptom and refer to the Jaguar Approved Diagnostic System.