Drivetrain - Transfer Case Removal Procedure Update

NUMBER:
XT308-007

MODEL:
X-TYPE

DATE:
April 07, 2006

SECTION: 308-07

Transfer Case Removal and Installation Workshop Procedure

AFFECTED VEHICLE RANGE:
Jaguar X-TYPE

VIN:
C00294 onwards

Model Year:
2002 onwards

CONDITION SUMMARY:

NEW WORKSHOP PROCEDURE TO REMOVE AND INSTALL THE TRANSFER CASE

This bulletin has been issued to inform Authorized Repairers of a change in the workshop procedure to remove and install the transfer case.

NOTE:
This new workshop procedure is effective for ALL workshop repair procedures that require a transfer case removal and installation.

Situation:

The current workshop procedure calls for the removal of the front subframe. The new workshop procedure leaves the front subframe in place.

Action:

In the event a transfer case is to be replaced, refer to the GTR Repair Procedure referenced in this bulletin to remove and install a new transfer case assembly.

PARTS:

No parts required. Information purposes only.





WARRANTY

REPAIR PROCEDURE

TRANSFER CASE REMOVAL AND INSTALLATION

NOTE:
GTR lookup sequence is as follows:

GTR Home> NAS>Service Information/X-400 - X-TYPE/2002>Workshop Manuals>X-TYPE Workshop Manual>Bookmark "Powertrain/Clutch and Transfer Case/308-07: Transfer Case/Removal or Installation" Link "Transfer Case (46.10.01)"

1. Refer to GTR Workshop Manual section 46.10.01 and replace the manual or automatic transfer case.





Disclaimer