Flywheel: Service and Repair

Flywheel

Removal
1. Remove the clutch disc and pressure plate.





2. NOTE: Prevent the flywheel from rotating. Remove the flywheel.

Installation





1. NOTE: Make sure the crankshaft and flywheel mating faces are clean before installation.

NOTE: The flywheel will only locate in one position.

NOTE: Tighten the retaining bolts working diagonally.

Install the flywheel.
^ Prevent the flywheel from rotating.
^ Tighten to 80 Nm.
2. Install the clutch disc and pressure plate.