Instrument Panel

Instrument Panel

Removal
1. Disconnect the battery ground cable.
2. Remove the steering column.
3. Disconnect the in-vehicle temperature sensor hose.
1. Remove the hose.
2. Remove the securing clip.







4. Remove the instrument panel console.
5. Remove the ashtray retaining screw covers.







6. Detach the ashtray.
- Remove the ashtray retaining screws.







7. Remove the ashtray.
- Disconnect the electrical connector.







8. Remove the floor console register duct.
1. Remove the retaining nut.
2. Remove the floor console register duct.







9. Detach the floor console wiring harness retaining bracket.







10. CAUTION: Make sure damage does not occur to the interior trim.

Reposition the floor console retaining bracket.







11. CAUTION: Make sure damage does not occur to the interior trim.

NOTE: Reposition the floor console bracket.

Disconnect the transmission selector switch electrical connector.







12. Disconnect the lateral/yaw rate sensor electrical connector.







13. NOTE: Reposition the floor carpet.

Detach the wiring harness ground connector.







14. Detach the wiring harness from the instrument panel retaining bracket.







15. Disconnect the electrical connector.







16. Remove the retaining bolt.







17. Remove the instrument panel retaining bracket.







18. Remove the retaining bolt.







19. Remove the instrument panel retaining bracket.







20. Remove the floor console adaptor duct retaining clip.







21. NOTE: Left-hand shown, right-hand similar.

Remove the cowl side trim panels.
1. Detach the front door opening weather strip.
2. Detach the scuff plate trim panel.
3. Remove the cowl side trim panel.







22. NOTE: From the left-hand footwell.

Disconnect the electrical connector.







23. NOTE: From the left-hand footwell.

Disconnect the electrical connector.







24. NOTE: From the right-hand footwell.

Disconnect the electrical connectors.







25. NOTE: Left-hand shown, right-hand similar.

Disconnect the climate control electrical connector.







26. NOTE: Left-hand shown, right-hand similar.

Disconnect the climate control electrical connector.







27. NOTE: Right-hand shown, left-hand similar.

Detach the front door opening weather strip.







28. NOTE: Right-hand shown, left-hand similar.

Remove the instrument panel end panel.







29. Disconnect the electrical connectors.







30. Disconnect the electrical connectors.







31. Remove the sunload sensor.

32. NOTE: Right-hand shown, left-hand similar.

Detach the defogger duct.







33. NOTE: Right-hand shown, left-hand similar.

Remove the defogger duct.







34. Remove the retaining bolt.







35. Remove the retaining bolt.








36. Remove the retaining bolts.







37. Remove the retaining bolts.







38. CAUTION: Make sure damage does not occur to the instrument panel and interior trim on removal of the instrument panel.

Remove the instrument panel.

Installation

CAUTION: Make sure damage does not occur to the instrument panel and interior trim on installation of the instrument panel.

1. To install, reverse the removal procedure.
2. Tighten to 20 Nm.







3. Tighten to 20 Nm.








4. Tighten to 20 Nm.







5. Tighten to 20 Nm.







6. Tighten to 9 Nm.







7. Tighten to 9 Nm.







8. Tighten to 9 Nm.







9. Tighten to 9 Nm.







10. Tighten to 3 Nm.