Engine - Revised Removal Procedure

NUMBER: JTB00102
(ISSUE 1)

MODEL: S-TYPE

DATE: 22 MAY 2008

SECTION 303

New Workshop Procedure - Remove / Install Engine Oil Pan

AFFECTED VEHICLE RANGE:
S-TYPE (X200) 3.0L V6 Only VIN: M45255 - N91220
Model Year: 2003 - 2008

CONDITION SUMMARY:

Situation:

The procedure for the removal / installation of the 3.0L V6 engine oil pan has been revised. The old procedure required the removal of the A/C compressor and alternator. The new procedure requires the A/C compressor and alternator to be tied away from the engine.

Action:

In the event it becomes necessary to remove / install the engine oil pan, follow the revised Repair Procedure outlined below.

PARTS:

No parts necessary

TOOLS:

Refer to Workshop Manual (GTR) for any special tools (if required)





WARRANTY

REPAIR PROCEDURE

REMOVE / INSTALL ENGINE (3.0L V6) OIL PAN

NOTE:
Global Technical Reference (GTR) lookup sequence is as follows: GTR Home > NAS > X200 - S-TYPE > Service Information > Model Year Workshop Manual > 3: Powertrain > 303: Engine > 303-01A: Engine - 2.5L / 3.0L

1. Refer to Workshop Manual (GTR) Section 303-01A: Engine - 2.5L / 3.0L (12.60.44) to remove / install the engine oil pan.





Disclaimer