Driver Door Module

86.80.29

Driver Door Module (DDM)

Removal

1. Prior to removal of the module, upload module configuration information to the Jaguar approved diagnostic system. This information needs to be downloaded into the new module once installed.

CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.

2. Disconnect the battery ground cable.
3. Remove the front door trim panel.







4. Disconnect the driver door module (DDM) electrical connectors.







5. Remove the DDM.

Installation
1. To install, reverse the removal procedure.
2. After installation of the module, download module configuration information to the new module.