Instrument Cluster

Instrument Cluster

Inspection and Verification
1. Verify the customer concern.
2. Visually inspect for obvious signs of damage and system integrity.

Mechanical Electrical
- Fluid level(s) - Fuse(s)
- Accessory installations - Wiring harness
- Electrical connector(s)
- Instrument cluster
- Central Junction Box (CJB)
- Engine Junction Box (EJB)
- Driver Door Module (DDM)
- Engine Control Module (ECM)

3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
4. If the cause is not visually evident, check for DTCs and refer to the DTC Index.