Fuel Temperature Sensor: Service and Repair

Fuel Temperature Sensor (18.30.99)

Removal

WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.

1. Remove the cover and disconnect the battery ground cable.
2. Remove the engine cover.
3. Remove the fuel temperature sensor.
- Disconnect the electrical connector.
- Position an absorbent cloth to collect fluid spillage.

WARNING: The spilling of fuel is unavoidable during this operation. Ensure that all necessary precautions are taken to prevent fire and explosion.

CAUTION: Always plug any open connections to prevent contamination.







Installation
1. Install the fuel temperature sensor.
- Clean the components.
- Tighten the sensor to 7 Nm (5 lb.ft).
- Connect the electrical connector.

WARNING: After carrying out repairs, the fuel system must be checked visually for leaks. Failure to follow this instruction may result in personal injury.

2. Install the engine cover.
3. Connect the battery ground cable and install the cover.