Timing Components: Specifications

Crankshaft Pulley
Install the crankshaft pulley bolt.
Torque to 120 Nm.
Loosen the bolt (minimum 1 turn).
Torque to 50 Nm.
Angle Torque to 90°.

Timing Chain Tensioner
Install the left-hand timing chain tensioner.
Tighten to 25 Nm.

Timing Cover





NOTE: The engine front cover retaining bolts numbered 3,4, 10 and 11 are longer than the retaining bolts numbered 1,2,5,6,7,8,9,12,13,15 and 16. The retaining bolt numbered 14 is a retaining bolt with a stud head.

Install the engine front cover, completing the tightening sequence .
Tighten to 25 Nm.