Grille: Service and Repair

Radiator Grille



This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures
For additional information, refer to TAS Symbol Glossary TAS Symbols Glossary

Removal
1. Remove the radiator grille retaining bolts.







2. NOTE: Left-hand shown, right-hand similar.

Remove the air deflector.







3. NOTE: Left-hand shown, right-hand similar.

Detach the radiator grille.







4. Remove the radiator grille.







Installation

1. NOTE: Check the lower radiator grille retaining legs are fully seated by lifting the rubber skirts after installation.

To install, reverse the removal procedure.