Horn: Service and Repair

Horn (86.30.02)

Removal
1. Open the hood.
2. Remove the fan cowl.
- Remove the 15 clips.







3. Remove the horn assembly.
- Release the clip and position the wiring harness aside for access.
- Disconnect the electrical connector.
- Remove the stud.

NOTE: Note the fitted position.







Installation
1. Install the horn assembly.
- Connect the electrical connector.
- Tighten the stud to 25 Nm (18 lb.ft).
- Secure the electrical harness with the clip.
2. Install the fan cowl.
- Secure with the clips.