Parking Brake Module - Vehicles Without: Convertible Top
Parking Brake Module - Vehicles Without: Convertible TopRemoval
1. Remove the cover and disconnect the battery ground cable.
2. Remove the rear seat backrest.
3. Release the auxiliary junction box mounting bracket.
> Remove the 3 nuts.
4. Remove the parking brake module.
> Remove the 3 nuts.
> Disconnect the 2 electrical connectors.
Installation
1. Install the parking brake module.
> Tighten the nuts to 4 Nm (3 lb.ft).
> Connect the electrical connectors.
2. Secure the auxiliary junction box mounting bracket.
> Tighten the nuts to 10 Nm (7 lb.ft).
3. Install the rear seat backrest.
4. Connect the battery ground cable and install the cover.